*AREA SIX 350BHP JWRC FIESTA PROJECT*

[FiestaRS]

thought id show you guys my new project,as its on a few sites now like.
you may remember me on here asking advise about ZT`ing my fiesta mk3 showcar?,well i got anoyed with m.o.t bills and repairing things all weekend so i decided to sell it, buy an 06 fiesta ST and start again.

2006 performace blue face lift-






ok,out come the seats -


on go some morette front lights-






rear black lexus (i know,but at least they arnt silver )


stereo out,in car computer with touch screen in-
(the background on the screen is how this car will look)








full fusion fab rollcage-





genuine m-sport wrc seats with TRS harness-







genuine m-sport wrc carbon door cards,carbon look m-sport rears not pictured-





genuine naked carbon JWRC spoiler. (cost a fookin fortune :roll: )
it would be a crime to paint this ....




genuine JWRC carbon look roof scoops (need cutting out as you can see)


genuine JWRC bonnet (going to change the mesh to match the bumpers mesh i would of thought...


morrett wing mirror covers with indicators (the jwrc arches wipe out the side repeaters so i got these.may cover them in carbon look film to match spoiler/scoops?)

clear rear brake light (now i got this as it looked smart on the pic but im not liking it tbh,may tint it black or just smooth over the part where it sits?)


OK,ENGINE STUFF....





COSWORTH-one of my fav words !!! haha

OH DEAR-sad to look at :nope: .......for now


UPDATE
wheels have arrived,had to put the stickers on ourselves....fcukin Ł1600 and you have to D.I.Y hahaha










MORE ENGINE STUFF - these pics are 2 weeks old and its ready to start mapping.




REPLACED THE CLUTCH WITH A 6 PADDLE....



rear doorcards


and engine finished......











the air filter is positioned right under the airscoop on the JWRC bonnet
ill try and get some vids up when im next with the car,prolly thursday when it hits the bodyshop.

other items,eg,reg plates,plastic windows all arrived and look awsome

BOUGHT BUT NOT FITTED-
plastic windows (these are unreal,they look amazing)
JWRC body kit (wide arches/bumpers/splitter)
coilovers


car is now with ian howell (area six/fiesta frenzy) having turbo conversion etc and were looking at minimum 350BHP.
then it will be taken to skill customs for fitting/spraying,
(see background pic on in car pc)
and finally to dmb for full team RS sticker kit

OK
took some pics while i was at the garage.
quality is horrible sorry,the camera on my fone is rubbish
basically here just checking that the wheels are wide enough with the hub convertors,and discovering that the waitec coilovers i bought,while look awsome on a standard fiesta ST once it was loward down,
dont go low enough at the back with the massive JWRC arches.
bummer,buying some gaz shocks to replace them





BIT WIDE HAHA-











BITS OF ARCHES CUT OFF-




some good quality pics,took a cam with us tonight...


























bumper slowly transforming into concept version,far better then the regular one imo.

BEFORE-



AFTER-
needed to drop the splitter by an inch anyway because of the intercooler so its a good job we went for this style really .








smoothing the boot...



smoothed boot,doors....






and a little special touch..RS reflectors
(work in progress,reflectors not fitted behind yet)





WINDOWS (plastic covers still on,rear and one of the side rears shown but have bought full set obviously )


STEERING WHEEL (fiesta sporting trophy)



PRIVATE REG


SUSPENSION (putting suspension on)




FOCUS RS FINS (smoothing n finishing)


REAR


SIDE (started to fill in and build the inner arches)

*UPDATES*
15TH MARCH
1st coat of primer,just to bring out any flaws in the surface so it can be rubbed down again...






REAR BUMPER


BOOT


WING


BONNET (VENT SMOOTHED IN)


DOOR


DOOR2

[BokiRS]

Ova Fiesta je zlo

[FiestaRS]

brakes done
AP Racing 6 pots 330mm
waiting for braids to arrive




dash out for flocking after its cut for the new roll cage.


roof vents measuring,may either blend them in or paint them black not sure yet


real vents of course cut in


inside car view


random pic


OK,ROLLCAGE TIME.....



















ROLLCAGE DONE (well,2 little triangles to go in the rear cross bar that match the door bar ones)








this is a proper J-WRC cage fitted by mark who did the first 6 m-sport fiesta J-WRC cars and still does alot of the WRC cars today.
its conected to the suspension so the car is rock solid when cornering etc.
ive missed out a diagonal bar from corner of roof to floor behind seats as i thought it looked abit clumsy,and a cross brace accross the roof which was missed out (as the 1st J-WRC cars did because of the position of the roof scoops which is why the next batch of cars had the scoops closer together to alow the big roof cross brace)
i like them spread apart though...
the guy is a wealth of knowledge on J-WRC cars and has been interrogated thoroughly haha.


few little updates,back on all fours now.suspention all conected to the rollcage etc,brakes look really nice behind the wheels.


smoothed out the welds on the door bars so it looks nice and clean/neat when its sprayed white.











the RS thingys in the rear bumper replaced with STT,little practice run here..


finish date,november 5th (hmm,we shall see haha)

[FiestaRS]

Ovo ce da odvaljuje 8-)

[kima]

Bas je zlo....nista lepse nisam video, a i radi ga vrhunski!!!

[Scorpio 696]

Uf ovo ce biti zver kada se zavrsi.

[Markedjani]

Jbt ovde je dosad otisao pun sleper funti :shock:

[FiestaRS]

Bash me interesuje koliko ga je izashlo, bash cu ga pitati kad zavrshi projekat.

[Iosis]

[Shomy_ksh]

Bash me interesuje koliko ga je izashlo, bash cu ga pitati kad zavrshi projekat.

pitaj ti njega da mi posalje one felne ST ionako mu nece trebati

ovo je zlo od auta

[BojanM]

Holy resurrection, Batman! Tema je iz 2008.

[Iosis]

Pazi stvarno nisam ni gledao, samo sam kliknuo kada sam vidio da ima novih postova nisam ni gledao na datum.

[knez91]

ja mislimd a sada ti drzis rekor u dizanju tema iz mrtvih , skoro 3god ako me mata ne zaebava

[FiestaRS]

update time.
dash has been fitted in around the cage nicely,then taken back out and is in my living room now waiting for me to take it to be flocked .
had some good extra ideas about the body which were working on (which is partly why its taking so long as i keep adding new sugestions).
the MAD fez is in the spray booth to get the cage in prima,starting to look more and more awsome...
(ignore the overspray inside,car is being resprayed frozen white anyway)





















its that time again i guess,updates!!!!!
now then,weve been a bit quiet lately as the rear bumper is being totally changed to take the number plate in a way that if we can pull it off should look really nice so im not going to show that.
what i can show (as well as the paint pics) is this idea i had about the front bumper which we have canned,as it didnt look as good in real life as it did in my head .
inspiration obviously from the new focus...








and a very quick mock up (forgive my paintshop skills) of roughly what it could of looked like
(sorry if this is your car )


anyway,opinions on that? should i have gone ahead and done it?

ok,paint pics.
frozen white,stripes not painted yet (only had my phone with me so the paint gets absoloutly no justice here but belive me,
it looks awsome and its not even finished on these pics.





























i had some mats made up by the way with the area six and STT logos stiched in.





and finally,just for fun,a pic i found which my car will look alot like


updates were to be done last week but i blew my pc up haha
(PLEASE NOTE,the lower springs havnt been fitted yet)
ok,
fuel filler into window (please excuse the pokadot pajamas)











ok,off to the lock up...









flocked dash





gauges for air vents





and some quick shots









UPDATES UPDATES UPDATES
lost all my bookmarks when my pc decided to blow up so i only updated the threads i could remember,looks like i forgot about this one sorry.
ok,finally got the car lower,some pics of this and then pics of how we did it,then some rear bumper/better dash pics.
enough waffle...





















you cannot roll a coke can all the way under
theres travel still,the coilovers arnt right down,but im going to come up a little i think just to be safe.
nice stance for shows tho..




heres how we did it,alot of work but 100% worth it.





















rear bumper
(may paint the things on each side black with reflector behind,just trying stuff here)









and a few better pics of the flocking etc..







ok,wheels are off,and i dropped them at the powdercoat guy today to be done gloss black..

lights,indicator smoothed



bumpers sprayed (not bolted on or anything just seeing how it looked) splitter was being painted so will get pics next time















tyres off the wheels in one of the bedrooms much to the horror of the missus :ph34r:


quick vid,my G1 is a bit rubbish but...(just running the base map remember)

just to add,under the arches is not finished yet.

-UPDATES SPOILER FITTING-

OK ITS FINISHED *phew*
heres the final build pics and a few at the end i took while the mag feature was happening...
fuel pipe



powdercoated pipe silver and replaced silver screws with black ones





going for OM look with the grilles.




















more...








putting the pc back in etc..






push button start and boost gauge







made some door pulls like the old porches used to have







and some pics i took while fastford was doing stuff...




















quick vid,will do some good ones soon
[youtube][/youtube]


fiestyRS on Fri Jul 16, 2010
**THE END**
thanks for reading all this time...


Skinuto sa http://www.fiestaturbo.com

[Iosis]

Ala je skockao Fiesticu...

[Boris88]

jel 1.4 tdci ili je onaj jaci 1.6?

[Battaca]

Sve je to lepo ali mislim da je malo preterao,sad je napravio dvosed u koji treba dobro da se pomucis da bi se uvukao.Nego nije mi jasno zasto je lepio one nalepnice na bele felne kad ih je kasnije ofarbao u crno.

[Iosis]

Možda je imao u prvom planu da budu bjele, pa kasnije se predomislio pa prefabrao u crno.

[dule0911]

jel 1.4 tdci ili je onaj jaci 1.6?

1.4 ali cuniran