Ja sam imao sledeće greške:
===PCM DTC U0101:00-28===
Code: U0101 - Lost Communication with TCM
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===PCM DTC U0151:00-28===
Code: U0151 - Lost Communication With Restraints Control Module
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===PCM DTC U0121:00-28===
Code: U0121 - Lost Communication With Anti-Lock Brake System (ABS) Control Module A
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===PCM DTC U0155:00-28===
Code: U0155 - Lost Communication With Instrument Panel Cluster (IPC) Control Module
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===PCM DTC P193D:82-28===
Code: P193D - Cruise Control Multi-Function Input Signal
Additional Fault Symptom:
- Alive/Sequence Counter Incorrect/Not Updated
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===OBDII DTC U0155-C===
Code: U0155 - Lost Communication With Instrument Panel Cluster (IPC) Control Module
Status:
- Confirmed - malfunction is confirmed
Module: On Board Diagnostic II
===ABS DTC U0300:00-28===
Code: U0300 - Internal Control Module Software Incompatibility
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Antilock braking system
===ABS DTC C1109:64-68===
Code: C1109 - Vehicle Dynamics Control Switch
Additional Fault Symptom:
- Signal Plausibility Failure
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
- Test not complete
Module: Antilock braking system
Freeze Frame :
-GLOBTIM: 283950018 s - Global real time
-TOTDIST: 0.0 km - Total Distance
-MAINECUV: 12.25 V - Main ECU voltage supply
-OUTTMP: 23 °C - External Temperature From Sensor
===ABS DTC U0140:00-68===
Code: U0140 - Lost Communication With Body Control Module
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
- Test not complete
===IPC DTC P0850:62-2C===
Code: P0850 - Park / Neutral Switch Input Circuit
Additional Fault Symptom:
- Signal Compare Failure
===ABS DTC U0401:00-68===
Code: U0401 - Invalid Data Received from ECM/PCM A
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
- Test not complete
===ABS DTC U0126:00-28===
Code: U0126 - Lost Communication With Steering Angle Sensor Module
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Antilock braking system
===RCM DTC U0300:00-28===
Code: U0300 - Internal Control Module Software Incompatibility
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Restraint Control Module
===PSCM DTC U0415:00-08===
Code: U0415 - Invalid Data Received from Anti-Lock Brake System (ABS) Control Module A
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Power Steering Control Module
Freeze Frame :
-GLOBTIM: 284296309 s - Global real time
-TOTDIST: 159991.0 km - Total Distance
-MAINECUV: 12.00 V - Main ECU voltage supply
-OUTTMP: 23 °C - External Temperature From Sensor
-PWR_MODE_KEY: Ignition On - Power Mode Key State
-PWR_MODE_QF: Power Mode OK - Power Mode Quality Factor
-SS_TRQ2: 12.4 Nm - Steering Shaft Torque 2
-MOD_SUP_V: 4.80 V - Module Supply Voltage
-PSCM_INT_TEMP: 40 °C - PSCM Internal Temperature
-VSS: 0.0 km/h - Vehicle Speed
-DLA_SED_FD0B_PID: 142 - DL_SED_FD0B_PID
-DLA_NUM_FD0C_PID: -0.02 A - DL_NUM_FD0C_PID
-DLA_NUM_FD0D_PID: 0.00 A - DL_NUM_FD0D_PID
-DLA_NUM_FD0E_PID_1: 0.0 Nm - DL_NUM_FD0E_PID_1
-DLA_NUM_FD0F_PID_1: 0 1/min - DL_NUM_FD0F_PID_1
===PDM DTC U0010:88-2C===
Code: U0010 - Medium Speed CAN Communication Bus
Additional Fault Symptom:
- Bus Off
Status:
- DTC Maturing - Intermittent at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Passengers Door Control Unit
===DDM DTC U0010:88-2C===
Code: U0010 - Medium Speed CAN Communication Bus
Additional Fault Symptom:
- Bus Off
Status:
- DTC Maturing - Intermittent at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Drivers Door Module
===RFA DTC U3003:62-28===
Code: U3003 - Battery Voltage
Additional Fault Symptom:
- Signal Compare Failure
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Remote Function Actuator
===IPC DTC P0850:62-2C===
Code: P0850 - Park / Neutral Switch Input Circuit
Additional Fault Symptom:
- Signal Compare Failure
===IPC DTC U3006:16-28===
Code: U3006 - Control Module Input Power A Circuit / Open
Additional Fault Symptom:
- Circuit Voltage Below Threshold
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Instrument Panel Control Module
___________________________________________________________
Ukratko imao sam SVE greške.
Uglavnom je izgubljena komunikacija sa BCM i to bilo al sada nije.
Uzeo sam i obrisao sam ih sve, pa ćemo videti posle malo vožnje šta je stvarno problem (pojaviće se ponovo) a šta je samo ostalo zapisano.
Ono šta me zanima je da li neko može da zaključi šta je moglo da se desi automobilu za sve ove greške?
Da li govore nešto?